MIRROR INK AM9212
Solvent based screen printing ink that will achieve a mirror-like finish
on transparent substrates , very good adhesion even on rigid substrates (
PMMA , Glass).
AM9212 is a ready to use, mono-component ink that requires a specific drying
process. Dry in will be made at a low temperature (40 to 50°C), so that
particles contained inside the ink can spread evenly in order to obtain a
perfect surface. Drying time will be 10 to 15 minutes. Some specific
substrates like PMMA require a longer drying time. The ink film will reach a
complete hardness only after a 5 hours storage time and complete mirror
effect will reached after 20 hours Please note that substrates have to be
perfectly clean, without any dust, fingerprints, or marks in order to obtain
the mirror like effect.
2-component high gloss epoxy ink.The 8500 series ink has exceptional
adherence over numerous glass, plastic and metal substrate, excellent
hardness, high gloss and good resistance to abrasion and chemicals e.g.,
detergents, solvents and alcohols. The hardener 8592B is sufficient in the
majority of cases.