PRODUCTS

ENCRES DUBUIT-UV Inks

 

 

SEFAR

Mesh

Equipments

KIWO

Stretching & Bonding

Mesh Pre-Treatment

Photo-Emulsions

Reclaiming

Stencil Cleaning

Mesh Post-Treatment

Solvent Based Adhesives

Water Based Adhesives

Screenable UV Adhesives

Special Adhesive Products

ENCRES DUBUIT

UV Inks

Solvent Inks

Varnishes

FIMOR

Squeegees

Accessories

SCHMID RHYNER

Special Effect Varnishes

 

MULTIPLUS INK
Especially designed for graphic applications, the MultiPlus UV Glossy ink series combines both high flexibility and fast curing characteristics with the advantage of a ready to use ink.
MULTIPLUS inks are particularly suitable for the following substrates: paper, board and self-adhesive PVC, rigid PVC, polystyrenes, polycarbonate, PMMA…

2AMX
A high gloss UV ink characterised by its great diversity and low sensitivity to the problems caused by static electricity.
2AMX is suitable for the majority of rigid PVC and styrenated substances in sheet or object form. Nevertheless, it is advisable to carry out pre-production trials using the actual working conditions before introducing 2AMX into a production situation.

TUBOFAST
TUBOFAST is a glossy UV curable screen ink formulated for printing on objects with UV or solvent based barrier varnish, for collapsible tubes. If necessary, it is possible to add, according to the shade, 3 to 5 % of G19/2 hardener to increase adhesion and water resistance. When using TUBOFAST with a hardener, the ink will be slightly sticky after curing; this will disappear very rapidly. This “sticky will no bother the landing in bulk of the tubes.”
 

POLYFLEX 248
The Polyflex series is a ready to use thermoformable and embossable ink, especially designed for printing on Polycarbonate, top-coated Polyester, Mat PVC for credit cards.
Polyflex 248 is especially designed for membranes printing on Polycarbonate or Treated Polyester.
Its outstanding flexibility allows cutting in printed areas, embossing and thermoforming.
When printing on mat PVC for credit cards, this ink is laminable ( hot pressure without overlay ).

EVOGRAF
EVOGRAF Series it is a ready to use Process Colour UV Ink, with a low residual odour, especially designed for large format and multi-colours online graphic machines.

POLYPLAK SERIES
These gloss UV ink series are designed for printing on polyolefines, PE and PP (bottles, cartridges, cans, capsules…) flame or Corona treated (surface energy > 40 dyn/cm). Low residual odour.

POLYPLUS
Polyplus is a monocomponent, ready-to-use, high gloss UV ink for flame treated (surface tension greater than 38 Dynes/cm) rigid and semi-rigid containers in polypropylene or polyethylene and also PVC, PETG and PETP substrates.


UVITUBE
UVITUBE is an UV curable screen ink formulated for printing on PE containers (mostly tubes) with UV or solvent based barrier varnish.

 

 
 

Home   |   Profile   |   Partners   |   Products   |   Recommended   |   Contact us

 
 

© San Printech  2010 All Right Reserved

 
 

 Site Designed By Maya Creations