PRODUCTS

KIWO-Mesh Pre-Treatment

 

 

SEFAR

Mesh

Equipments

KIWO

Stretching & Bonding

Mesh Pre-Treatment

Photo-Emulsions

Reclaiming

Stencil Cleaning

Mesh Post-Treatment

Solvent Based Adhesives

Water Based Adhesives

Screenable UV Adhesives

Special Adhesive Products

ENCRES DUBUIT

UV Inks

Solvent Inks

Varnishes

FIMOR

Squeegees

Accessories

SCHMID RHYNER

Special Effect Varnishes

 

PREGAN® NT 9 K (1:10)
Cleaning and degreasing concentrate (1:10) made of renewable raw materials
PREGAN NT 9 K is a highly efficient cleaning and degreasing concentrate for screen meshes. It is used in a dilution of 1:10 with water. PREGAN NT 9 K solutions emulsify contamination and fats and thus make them water soluble. Its formulation has especially been adapted to meet with the requirements of screen printing. PREGAN NT 9 K is therefore better than all conventional
detergents. It is suitable for all mesh types and prevents the appearance of pinholes and surface deterioration when coating with direct photoemulsions. In its formulation mainly components which are either made of renewable raw materials or produced biotechnically were used. PREGAN NT 9 K is pH-neutral, free from phosphates and chlorides and is easily biodegradable.
 

KIWO® MESH X-CEL
Ready-to-use liquid for degreasing, preparation, giving improved wetting and antistatic support of screen printing meshes.
KIWO MESH X-CEL is a highly efficient screen mesh preparation which improves the coating
properties of direct emulsions and the water transference of indirect and direct stencil making films (e.g. KIWOFILM range)
decisively. KIWO MESH X-CEL also acts as a degreaser and wetting agent, making it a universal agent for mesh pre-treatment.
Furthermore, KIWO MESH X CEL has an antistatic action. Screens, prepared with KIWO MESH X-CEL do not show the typical problems associated with static electricity, such as spattering of the ink during printing. Due to the improved adhesion of the emulsion to the mesh, KIWO MESH X-CEL also produces a higher resistance to long print runs, better printing properties of the ink and therefore a high quality print.
 

KIWOCLEAN® LM 611 E
Solvent based, water emulsifiable screen cleaner
KIWOCLEAN LM 611 E is a universally applicable screen cleaner for the removal of non-hardened inks from screens. In general, it is for use in automatic screen washing units. KIWOCLEAN LM 611 E is colourless, mild in odour and has little attack on photoemulsions. The cleaner contains an emulsifier which improves the cleaning effect. Very suitable for plastic (PVC), paper, UV- and acrylic inks, hardened pressure sensitive and flock adhesives based on acrylic dispersion, non-hardened two-component inks (e.g. solder mask).
 

 
 

Home   |   Profile   |   Partners   |   Products   |   Recommended   |   Contact us

 
 

© San Printech  2010 All Right Reserved

 
 

 Site Designed By Maya Creations