PRODUCTS

KIWO-Photo-Emulsions

 

 

SEFAR

Mesh

Equipments

KIWO

Stretching & Bonding

Mesh Pre-Treatment

Photo-Emulsions

Reclaiming

Stencil Cleaning

Mesh Post-Treatment

Solvent Based Adhesives

Water Based Adhesives

Screenable UV Adhesives

Special Adhesive Products

ENCRES DUBUIT

UV Inks

Solvent Inks

Varnishes

FIMOR

Squeegees

Accessories

SCHMID RHYNER

Special Effect Varnishes

 

AZOCOL POLY PLUS-S
Solvent resistant Diazo-UV-polymer photoemulsion
AZOCOL POLY-PLUS S is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, scales). Due to its high elasticity AZOCOL POLY-PLUS S is suitable for printing hollow bodies and if printing over material edges. A relatively good water resistance allows short runs with water based printing inks.

 

AZOCOL Z1
Solvent and water resistant Diazo-UV-polymer photoemulsion
AZOCOL Z 1 is used for the production of high-quality, solvent and water resistant stencils. Universally suitable for nearly all applications in screen printing. Ink resistances are hardly affected by high air humidity. Easily decoatable.
 

POLYCOL SUPRAPLUS
Solvent resistant, one-component photopolymer emulsion
POLYCOL SUPRA PLUS is used for the production of high-quality, solvent resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs (circuit boards, ceramic decals, bar-codes).
 

POLYCOL – UNO
Solvent resistant, one-component photopolymer emulsion
POLYCOL UNO is used for the production of high-quality, solvent resistant stencils. On account of its easy application and decoating, ideal for industrial use with large quantities of stencils and/or large format stencils. POLYCOL UNO is suitable for almost all requirements for graphic screen printing.

POLYCOL- XXL
Highly viscous, one-component photopolymer emulsion for very high stencil build-up thickness.
POLYCOL XXL is a one-component photo emulsion. High viscosity and solids content make it especially suitable for direct coating of coarse mesh and the production of stencils with a high coating thickness. Stencils made with POLYCOL XXL are typically used for printing Plastisol, aqueous textile and ceramic inks as well as granulates.
 

CERACOP® 2300
Chemically curable Diazo-UV-polymer photoemulsion
CERACOP 2300 is used for the production of high-quality, water and solvent resistant screen and textile printing stencils. The print run resistance can considerably be increased by chemical hardening with KIWOSET K. Before hardening, CERACOP 2300 is decoatable with PREGASOL products. Mainly used for textile and ceramic printing.

 

KIWOCOL-227
Water resistant Diazo-photoemulsion

KIWOCOL 227 is used for the production of stencils which are resistant to aqueous printing media and plastisol inks. Mainly used for T'shirt and ceramic printing. Easily decoatable.


AZOCOL® Z 130
Solvent and water resistant Diazo-UV-polymer photoemulsion
AZOCOL Z 130 is used for the production of high-quality, solvent and water resistant stencils. High resolution and excellent mesh bridging make it suitable for printing finest half-tones, lettering and designs. Universally suitable for nearly all applications in screen printing. AZOCOL Z 130 is easily decoatable.

KIWOCOL 18
Solvent resistant, fast exposure Diazo-photoemulsion, suitable for all graphic application and easily decoatable

 

 
 

Home   |   Profile   |   Partners   |   Products   |   Recommended   |   Contact us

 
 

© San Printech  2010 All Right Reserved

 
 

 Site Designed By Maya Creations